Important Recources | Orbis Machinery

MATERIAL BEHAVIOR

Which best describes the material you are processing?

Choose the behavior that creates the biggest processing challenge.

Free-flowingPowders, granules or low-resistance materials Low to medium viscosityFlows readily under normal mixing conditions High viscosityStrong resistance to flow Sticky or cohesiveMaterial clings, stretches or resists release Heavily filled or denseHigh solids or substantial material loading Not sure yetI need help defining the material behavior

REQUIRED MIXING BEHAVIOR

What does the material need the mixer to do?

Select all that apply. Most mixers create some combination of flow and shear; the useful question is what behavior your process actually requires.

Blend / circulatePrimarily create uniform material movement Knead / foldWork cohesive material through repeated turnover Strong turnoverMove difficult material through the active mixing zone Shear / dispersionApply meaningful mechanical energy to the material Control heatHeat or cool the material during processing Vacuum / deaerationRemove entrapped air or volatiles

PRODUCTION MODE

How do you expect the process to run?

Batch productionDefined recipes or discrete production runs Batch mixing + extrusionMix a batch, then mechanically feed downstream Continuous productionSustained feed, mixing and discharge Not sureI want help comparing batch and continuous processing

DISCHARGE

What happens after the material is mixed?

It flows or drops easilyGravity-assisted discharge may be practical Tilting or bottom dump may workThe material moves, but needs controlled discharge It needs mechanical helpSticky or dense material may need auger / extrusion discharge Not sureDischarge is one of the things I need to evaluate

PRODUCTION DUTY

How demanding is the production environment?

Lab / pilotTesting, development or smaller-scale work Regular productionRecurring commercial or industrial batches Sustained heavy-duty productionHigh loads, long runs or demanding production duty Not sureI need help defining duty requirements

YOUR RESULTS ARE READY

Enter your details to view your fit check.

We’ll show your recommendation immediately and send a copy to your inbox.

By submitting, you’ll receive your recommendation by email and your answers will be shared with the Orbis application team for follow-up.

YOUR FIT CHECK

Why this result

Likely path to explore

This is an educational screening tool, not a final equipment specification. Material testing and engineering review may change the recommendation.

YOUR INPUTS

Talk With an Orbis Engineer

Is a Double Arm Mixer right for your process?