Doubling Efficiency in the Same Footprint: Orbis Machinery’s Innovative Production Solution

Orbis Machinery LLC - production output increased by over 50%, fulfilling the customers growing needs without the extra space

Orbis Machinery leads the way in custom industrial process solutions, specializing in mixing applications for materials with high viscosity of 10 million plus centipoise. Our innovative engineering addresses critical space and capacity challenges, handling temperatures up to 750°F (400°C). This case study reveals how we customized advanced replacement mixers for a client, boosting their production capacity significantly while operating within the existing spatial limitations. Faced with these constraints and needing a significant production boost, the client sought Orbis Machinery’s expertise. Our solution was to design and implement advanced mixers that fit within the pre-existing space, thereby amplifying output production substantially. This transformative solution epitomizes Orbis Machinery’s dedication to innovation, operational excellence, and customer satisfaction, showcasing the strategic and technical acumen that propels our success in the process equipment industry.

Customer Overview:

Operating in a high-demand industry of recycled products, the customer required precise and efficient mixing capabilities coupled with extruding to meet escalating production goals. However, their existing mixer extruders, which took up valuable space, fell short in meeting rising production demands.

Challenge:

The central issue was the space and capacity constraints. The existing mixers could no longer support the required production volume, and expanding the facility was not an immediate option. The imperative was to find a solution that could maximize the existing space and significantly boost production capacity.

Orbis Machinery’s Solution:

Orbis Machinery undertook a comprehensive analysis of the customer’s needs and the current setup. The solution involved custom-designed replacement mixers that maintained the footprint of the old units but incorporated advanced technology to increase production by more than 50%.

Key features of the new mixers included:

- - - - Innovative blade design for more efficient mixing.
      - Optimized drive configuration to enhance power delivery and efficiency.
      - Abrasion-resistant coatings to prolong the mixer’s lifespan.

Orbis Machinery LLC direct drive ball mills

Benefits:

The installation of Orbis Machinery’s replacement mixers led to a host of improvements:

- - - Increased Production Efficiency: Production output increased by over 50%, meeting the customer’s expanding needs without requiring additional space.
    - Space Utilization: The solution averted the immediate need for facility expansion, saving significant costs and logistical challenges.
    - Enhanced Operational Performance: Improvements in heating flow and surface area, along with flexible drive configurations, resulted in a more efficient mixing process.
    - Durability and Maintenance: Auger design enhancements and abrasion-resistant coatings reduced wear and tear. Mixer components became interchangeable, easing maintenance.
    - Corrosion Resistance: The use of alternative materials like stainless steel combated corrosive environments, improving the mixer’s longevity.
    - Inventory and Cost Reduction: A more streamlined design meant fewer replacement parts were needed, decreasing inventory costs.
    - Installation Efficiency: An integrated manifold system in each mixer reduced reliance on external contractors and shortened installation times from weeks to days.

Technical Insights:

The innovative blade design and drive configuration were central to the mixer’s enhanced performance, enabling smoother and quieter operation. The optimized load curves maintained efficiency while accommodating increased production demands.

Handling Corrosion:

A significant technical challenge was the corrosion caused by hydrochloric acid gas produced during the mixing process. Orbis Machinery’s solution utilized corrosion-resistant materials like stainless steel, especially in critical areas such as feed and discharge tubes, to mitigate the destructive effects of the acid.

Conclusion:

Orbis Machinery’s custom-designed mixers addressed the customer’s space and capacity challenges and established a new benchmark for operational efficiency and production capability in their industry. This illustrates how Orbis Machinery’s innovative approach and technical acumen deliver solutions that drive client success and operational excellence.

At Orbis Machinery, we’re not just about creating industry-leading equipment; we’re about fostering partnerships that drive innovation and efficiency in your operations. Ready to take the next step towards optimizing your operations? Connect with us today to discuss how Orbis Machinery can tailor solutions to meet your unique needs and challenges.