Milling Jars

Roalox Alumina-Fortified Grinding Jars

Jar Size Jar Volume Approximate Outside Dimensions (Inches) Approx. Net Weight (lbs.)
Gallons Liters Diameter Jar Height Overal Height Mouth Opening
000 0.1 0.3 3-3/8 4-3/8 5-1/2 1-1/4 1
00 0.3 1 5-1/2 5-1/2 6-3/4 2-3/4 5
0 0.5 1.8 5-7/8 7-1/4 8-3/4 2-3/4 7
1 1.5 5.6 8-7/8 8-1/2 11-1/2 5-1/4 21
2 2.2 8.3 10-3/8 9-1/2 12 5-1/4 23
3 3.3 12.4 12-3/8 10 13 8 35
4 4.6 17.6 14-5/8 10 13 8 46
6 6.6 25 14-5/8 13 15 8 55

These ceramic jar bodies have been formulated to provide about 4 times the wear rate of our competitor’s porcelain jars. Lower silica content cuts silica contamination by more than half. High-strength, impact-resistant composition minimizes chipping and breakage.

Features

  • Positive lid locking bar and hand well for quick, easy opening and closing
  • Precision ground cover and gasket seat assure leak-proof fit
  • Wide mouths for fast emptying, cleaning, loading
  • Gaskets are oil, solvent and chemical-resistant Neoprene rubber
  • Inside surfaces are unglazed
 

High Alumina Grinding Jars

Jar Size Jar Volume Approximate Outside Dimensions (Inches) Approx. Net Weight (lbs.)
Gallons Liters Diameter Jar Height Overal Height Mouth Opening
00 0.3 1 6-3/8 5-3/8 7 3-11/16 5.5
1 1.5 5.6 9-1/2 8-1/2 12-1/4 7-1/8 23
3 3.3 12.4 13 10-3/8 13-1/2 9-3/4 45

Note: Volumes are +/- 10%

Features

  • Same design features as Roalox Mill Jars
  • Ultra-high fired ceramic body composed primarily of high-grade aluminum oxide
  • Extremely high abrasion resistance, long service life, negligible contamination factor
  • Recommended where silica contamination must be held to an absolute minimum
  • Polyurethane-coated body minimizes breakage
Typical Chemical Composition
Al2O3 88.5%
SiO2 6.5%
MgO 1.3%
Alkalis <0.2%
Fe2O3 Trace: 0.1%
TiO2 Trace: 0.1%
ZrO2 2.8%
 

Unlined Stainless Steel Jars

Jar Size Jar Volume Approximate Outside Dimensions (Inches)
Gallons Liters Diameter Jar Height Overal Height Mouth Opening
00 0.3 1 6-1/4 4-1/4 9-1/2 3-1/2
0 0.5 1.8 6-1/4 4-3-4 6-3/4 3-7/8
1 1.3 5 8-1/4 6-3/4 9-3/4 5-1/2
2 2.3 8.7 10-1/4 7-1/4 10-1/4 6-1/2
3 3.4 12.8 10-1/4 10-3/4 13-1/2 6-1/2
4 4.6 17.6 12-1/4 10-1/4 13-1/4 8
6 6.6 25 14-1/4 10-1/2 13-1/2 8

Note: Volumes are +/- 5%

Available in 7 standard sizes in Type 304 Stainless Steel, with or without internal lifter bars. Easy to use, fast cleaning. Features wide mouths, curved inside corners.

 

Lined Steel Grinding Jars

Jar Size Jar Volume Approximate Outside Dimensions (Inches) Approx. Net Weight (lbs.)
Gallons Liters Diameter Jar Height Overal Height Mouth Opening
00 0.3 1 6-1/4 4-1/4 6-1/2 3-1/2 8
0 0.5 1.8 6-1/4 5-1/2 7-1/2 3-1/2 10
1 1.3 5 8-1/4 7-3/4 10-7/8 5-1/8 11
2 2.3 8.7 10-1/4 8-1/2 11-5/8 6-1/8 14

Note: Volumes are +/- 5%

Features

  • All sizes have quick-change snap-in liners This feature isespecially significant when varied materials are milled and cross contamination must be avoided
  • Using a separate liner for each material protects the product, saves clean-up time, reduces number of jars required
  • Jars are carbon steel
  • Recommended where silica contamination must be held to an absolute minimum
  • Buna-N, EPDM, Low-Ash rubber, Neoprene, and Polyurethane liners are available

 Note: Cover liners are not snap-in; a different cover is needed for use with each liner

 

MIXING    BLENDING    DRYING    MILLING

orbismachinery.com